20" CLOEREN MANUAL FLEX LIP DIE
921774.018 One (1) used 20" wide Cloeren Sheet Die. Upper integral flexible lip with micro adjust...
22" CLOEREN MANUAL FLEX 3 LAYER SHEET DIE
921774.001 One (1) used 22" wide Cloeren Epoch IV manual, 3 Layer flex lip extrusion sheet die. U...
40 HP FOREMOST GRANULATOR MODEL HLD-7A
107891 One (1) Used 40 HP Foremost Granulator 24" X 26" FEED THROAT, 2 KNIFE OPEN ROTOR, 2 BED KN...
64" WIDE CROWN SHEET LINE WITH 4.5" EXTRUDER
107959 One (1) Used 64" Wide Crown Sheet Line with 4.5" Extruder Previously Running PET Hobbs 2-P...
75 GALLON TANK 25" DIA. X 37" STRAIGHT SIDE WITH AGITATOR
903259 One (1) used approximately 75 gallon vertical tank, 25" diameter x 37" straight side with ...
75 GALLON TANK 25" DIA. X 37" STRAIGHTSIDE WITH AGITATOR
903258 One (1) used approximately 75 gallon vertical tank, 25" diameter x 37" straight side with ...
75HP NELMOR GRANULATOR MDL G1436MB WITH FEED ROLLS
106136 One (1) Used Nelmor G1436MB Granulator with Feed Rolls In-feed: 4" Diameter x 35.5" Wide K...
DAVIS STANDARD EXTRUDER MDL. MV35IN35SR
107364 One (1) Used Davis Standard Extruder Model MV35IN35SR L/D BARREL HAVING A SEVEN (7) ZONE E...
DUAL 50 HP MOTOR FOREMOST GRANULATOR MODEL HD8
107892 One (1) Used Dual 50 HP Motor Foremost Granulator Model HD8 24" X 36" FEED THROAT, TANGENT...
EDI 14" H40 SHEET DIE
921703.011 One (1) unused EDI 14" sheet die. Unit has three center back entrances. Center entranc...
EDI CO-EX BLOCK
921703.016 One unused EDI Co-Ex block manufactured in 1992. SN 92-14473
EREMA LDPE/LLDEP FILM RECLAIM LINE MODEL KAG800/63
107361 One (1) Used Erema Film Reclaim Line A. MODEL 5000/600 INCLINED, CLEATED CONVEYOR MEASURIN...
EREMA WASTE RECLAIM EXTRUDER MDL KAG 806 MFG. 2007
106197 One (1) Used Erema Waste Reclaim Extruder Mdl kag 806 Mfg. 2007 Used Erema Automatic Edge ...
GRANULATOR SYSTEM RAPID 1831K
107362X One (1) Used Granulator System 1. Infeed: Insulated Tray w/Pneumatic Tilt-Back Assist 2. ...
REG-MAC FILM DENSIFIER
107360 One (1) Used Reg-Mac Densifier 50" OD X 47" DEEP CHAMBER, 2 BLADE DESIGN, DRIVEN BY A 517 ...
STERLING 4.5 " EXTRUDER 32.1 VENTED BARREL 200HP DC
108976 One (1) used Sterling 4.5" extruder, 32.1 vented barrel, (8) heater zones, screw and barre...
33" WIDE PILOT SHEET STACK, AC MOTORS, 11.5" DIAMETER
107961 One (1) Used 33" Wide 3 Roll Downstacking Sheet Stack, 11.5" Diameter Rolls Matte Roll Fin...