36" Geometric HOT MELT COATER/LAMINATOR

107947 One (1) Used 36" Hot Melt Coater Maximum web width 40" Primary unwind OD: 30" on 3" cores Secondary unwind OD: 30" on 3" cores Rewind OD: 30/32" on 3" cores Speed: Up to 750 fpm Coating method/width: 24" wide EDI UltracoatII Slot Die (currently has 22.5" opening) Fife edge guiding Ultrasonic diameter feedback tension control Primary Unwind * Fife auto edge guide traversing base assembly for web positioning * Tension controlled through ultrasonic diameter feedback to the unwind brake * Pneumatically actuated 4" diameter unwind air shaft * 3" diameter web support idler roll(s) A full width operator platform provides access to both unwind and coating station. Coating Station The coating station is ruggedly constructed of steel plate side frames machined together for alignment with structural steel tie bars. The coating station accommodates an extrusion coating slot die positioned 8" diameter fixed positioned silicone covered (70 to 80 durometer) back-up roll. The backup-roll is the "main speed reference" for the entire system and is driven by a CMC/Reliance DC system. Rotary unions are provided for the supply and return of the supplied cooling water. The web continues around a driven 14" diameter fixed position chrome plated chill roll. Rotary unions for the supply and return of customer supplied cooling water. A pneumatically actuated laminating nip idler roll combines the secondary unwind web with the coated substrate. A web support idler roll is also included to ensure a sufficient wrap on the chill roll. * Spreader/bow roll Heavy Duty Die Support and Adjustment System for Slot Die A heavy duty die support and adjustment system for the customer supplied extrusion coating slot die is provided with several adjustment functions. The system includes: * "X" In/Out Adjustments: the die mount includes die stops and pneumatic engage/disengage adjustments for the loading against the stops. * "Y" Angle of Attack Adjustment: This adjustment will alter the die angle at the centerline of the die tips (+/- 5 degrees) Secondary Unwind * Fife Auto Edge Guiding traversing assembly for web positioning * Tension controlled through ultrasonic diameter feedback to the secondary unwind brake * Pneumatically actuated 3" unwind air shaft * 3" diameter web support idler roll(s) Product Rewind * Tension controlled through ultrasonic diameter feedback to the rewind clutch/brake * Pneumatically actuated 3" rewind air shaft * Pneumatically actuated lay-on roll assembly Drive and Controls Hard wired operator controls include: Machine "Run" push-button Machine "Jog" push-button Machine "Stop" push-button Machine "E-Stop/Reset" operator button