54" WIDE RETROFLEX K SERIES HD 2 COLOR STACK FLEXO PRESS - PENDING SALE

One (1) Used 54” Retroflex K Series HD 2-color stack flexographic printer. Inline operation. New 2011. Serial # 20114528. Was inline with a paper tuber. Printing on kraft paper. 54” maximum web width. Maximum print width, 52.5”. Maximum mechanical design speed, 500 feet per minute. Set up 27” to 43” repeat. Former owner was using 27” and 43” repeat. Gearing, 1/4 circular pitch, CP helical. Tension range, 2 to 3 PLI. Water-based flexo ink. Mechanical registration capabilities, +/- 1/64”. Servo motors. Total of (2). Each print station has one 3 phase servo motor, Kottorgen, 640 volt DC, 3500 RPM, 7.08kw. Includes dancer assembly. There are (2) servo motors, one per print station. Ceramic anilox rolls. 57” chrome-covered impression roll. Pneumatic throw off of print cylinder & impression. Has constant rotating ink. Electric motor on each anilox roll, 1/8 HP, 90 volts. Manual side registration. Air-loaded rubber nip roll assembly. 2” thick side frames. Air-loaded dancer system with 57” wide idlers. 5” diameter aluminum idlers. Anilox to plate roll nip & plate to impression roll nip are pneumatically loaded. Side-lay adjustment for side-to-side registration. Sunday drive potentiometer can control speed for Sunday drive. Has automatic printer impression on / off. Has roll nip on / off; allows tension between the deck one and the dancer to be isolated. Factory was closed and printer was moved to warehouse. When printer was moved, owner misplaced two doctor blade assemblies, print cylinders & drives. No doctor blades, no print cylinders, no drives. Printer can print on paper, films & laminations. Original specs are available. Original manufacturer can sell new drive system, two new doctor blade assemblies & two new printing plates. When purchased in 2011, approx. cost was $220,000US. Machine is in very good mechanical condition.