USED REBUILT BLACK CLAWSON #3 DRIVE HYDROPULPER 4:1 GEAR RATIO

: No. 3 Drive, 4.0:1 gear Ratio • Drive Rebuild includes: Drive dismantled, cleaned by steam and sandblasted. The interior of main housings painted with an oil resistant paint. Inspect and record all critical fit dimensions. All bearing housings restored to original dimensions as required. Gear hub skimmed, if required, to eliminate run-out. Top housing pilot fit to pulper chamber restored, as required. New vertical ring gear shaft installed. New horizontal pinion shaft installed. New Klingelnberg "hard cut" hypoid bevel gears, 4.0 to 1 ratio. New Timken bearings installed. New shims, gaskets, seals and fasteners installed. New Inpro mechanical seal installed in top vertical shaft housing. New internal oil lubrication system installed. The drive assembled with the gears set to the correct backlash and gear tooth mesh pattern. Drive spin tested and the lubrication checked for proper flow. Drive exterior primed and finish painted with green machine paint. • The rebuilt drive is covered by a one (1) year guarantee on workmanship and material